Node m5-slatina77-zaluzje59

Node name m5-slatina77-zaluzje59
Location zalužje 59
Project Haloze
Maintainer S52SK
Node type wireless node
Node status up
Last seen 24/Apr/2014, 08:08:46

Node History

Clients so far 0
Stability 95.09 %
Events show list

Node in the Network

IP address 10.254.96.93
System node no
VPN server no
Border router no

Details

Status Information

Uptime 08 d 02 h 09 min 26 sec
Local time 09/Jan/1970, 03:21:16

Antenna Information

External antenna yes
Type directional
Polarization horizontal and vertical

Image Generator Information

Router type Ubiquity Nano M5
VPN enabled yes

Node Configuration

Firmware version git.2d1a7dd
BSSID 02:CA:FF:EE:BA:BE
ESSID backbone.wlan-si.net
Channel unknown
RTS threshold 2347 B (off)
Fragmentation threshold 2347 B (off)

Subnets

A node announces subnets to the rest of the network so traffic for network equipment (like clients' computers) connected (wirelessly or directly) to the node can be routed from the network to the node for it to pass the traffic to equipment in question.

Subnet Status Last seen
10.254.96.92/30 ok 24/Apr/2014, 08:09:45
10.254.96.93/32 ok 24/Apr/2014, 08:09:45
10.254.96.94/32 ok 24/Apr/2014, 08:09:45

Subnet status key:

ok
the allocated/registered subnet is announced properly by the node
peering
the subnet is being announced as a result of a peering to some external network
not announced
the subnet has been allocated/registered but is not announced by the node
not allocated
the subnet is announced by the node but has not been allocated/registered
collision
the subnet is announced by the node and is causing a collision with allocated/registered subnet of another node

Immediate Neighbours (Peers)

Each node can have multiple immediate neighbours (peers) to which it is connected with different link qualities.

Node LQ ILQ ETX
slatina-77-omni-m5 (10.254.96.69) 1.0 1.0 1.0
zaluzje-59-omni (10.254.181.145) 1.0 1.0 1.0

Columns:

Node
the node and its primary IP address
LQ
the ratio of packets that are successfully received from the node's neighbour
ILQ
the ratio of packets that are successfully sent from the node to its neighbour
ETX
measure of the link quality calculated from LQ and ILQ and used for routing decisions; closer to 1.0 is better

Graphs

last year last month last week last day
Traffic - br-clients

Traffic - eth0
This graph represents traffic of the node's ethernet interface.

Traffic - eth1
This graph represents traffic of the node's ethernet interface.

Traffic - ifb0

Traffic - ifb1

Traffic - wlan0
This graph represents traffic of the node's wireless interface.

WiFi Signal/Noise
This graph represents received signal and noise on the node's wireless interface.

WiFi Signal/Noise Ratio
This graph represents signal-to-noise ratio of the node's wireless interface.
Higher it is, better the transmission over the interface can be.

WiFi Bitrate
This graph represents bitrate of the node's wireless interface. It is an upper limit of real (transmission) bitrate (in practice lowered by noise and protocol(s) overhead).

Routing Peers
Each node can have multiple immediate neighbours (peers) to which it is connected
with different link quality. This graph represents the number of the node's peers.
To evaluate peer connectivity check the individual Link Quality graphs.

Packet Loss
Packet loss is measured from a central location and does not indicate connectivity quality to neighbouring nodes. To evaluate immediate neighbour (peer) connectivity check the individual Link Quality graphs. The graph does correlate with packet loss on the connection to/from the Internet.

Average Link Quality, Link Quality to muretinci-14 (10.254.138.241), Link Quality to podgorci-test (10.254.151.129), Link Quality to podgorci (10.254.154.65), Link Quality to panel-slatina-77-sever2 (10.254.157.225), Link Quality to podgorci (10.254.157.33), Link Quality to slatina-77-zahod (10.254.160.225), Link Quality to slatina-77-jug (10.254.163.129), Link Quality to test-novi-fw-v4 (10.254.166.161), Link Quality to zaluzje-59-omni (10.254.181.145), Link Quality to slatina-77-vzhod (10.254.181.97), Link Quality to slatina-77-home (10.254.190.145), Link Quality to slatina-77-sever-1-asus (10.254.195.97), Link Quality to slatina-link-urban (10.254.96.33), Link Quality to slatina-77-omni-m5 (10.254.96.69), Link Quality to m5-gradisca-panel (10.254.96.89)
Display:
  • LQ – the ratio of packets that are successfully received from the node's neighbour
  • ILQ – the ratio of packets that are successfully sent from the node to it's neighbour

Average ETX, ETX to muretinci-14 (10.254.138.241), ETX to podgorci-test (10.254.151.129), ETX to podgorci (10.254.154.65), ETX to panel-slatina-77-sever2 (10.254.157.225), ETX to podgorci (10.254.157.33), ETX to slatina-77-zahod (10.254.160.225), ETX to slatina-77-jug (10.254.163.129), ETX to test-novi-fw-v4 (10.254.166.161), ETX to zaluzje-59-omni (10.254.181.145), ETX to slatina-77-vzhod (10.254.181.97), ETX to slatina-77-home (10.254.190.145), ETX to slatina-77-sever-1-asus (10.254.195.97), ETX to slatina-link-urban (10.254.96.33), ETX to slatina-77-omni-m5 (10.254.96.69), ETX to m5-gradisca-panel (10.254.96.89)
Display:
  • ETX – measure of the link quality calculated from LQ and ILQ and used for
    routing decisions; closer to 1.0 is better

Latency
Latency is measured from a central location and does not indicate latency to neighbouring nodes.
The graph does correlate with latency on the connection to/from the Internet.

Load Average
This graph represents the node's CPU load.

Memory Usage
This graph represents various types of node's free memory.

Number of Processes
This graph represents the number of node's processes.